Dell PowerEdge R770 vs R7715
Dell PowerEdge R770 (Intel Xeon 6)
Dell PowerEdge R7715 (AMD EPYC 9005)
Both the PowerEdge R770 and R7715 are 17th-generation Dell 2U rack servers, but they sit at different points on the platform spectrum. The R770 is a dual-socket system built around Intel Xeon 6 processors, designed for balanced, scale-out compute with extensive memory, I/O, and GPU flexibility. The R7715 is a single-socket platform built around AMD EPYC 9005 (Turin) processors, designed to deliver high core density and strong memory bandwidth from one socket, which often simplifies licensing and lowers cost for the right workloads. Neither is strictly "better" — the right choice depends on whether you need the headroom of two sockets or the efficiency of one. This page lays out the practical differences so a buyer can match the platform to the workload rather than to the brand on the CPU.
Side by side
| Dell PowerEdge R770 (Intel Xeon 6) | Dell PowerEdge R7715 (AMD EPYC 9005) | |
|---|---|---|
| Processor platform | Dual-socket Intel Xeon 6 (supports both Performance-core and Efficient-core SKUs for tuning per-thread speed vs. density) | Single-socket AMD EPYC 9005 'Turin' series, spanning low-core entry SKUs up to very high-core flagships |
| Socket count | Two sockets — more total cores and aggregate memory bandwidth per node | One socket — fewer points of failure and often simpler per-socket software licensing |
| Memory | 32 DDR5 DIMM slots, up to roughly 8TB, DDR5 speeds up to 6400 MT/s (1DPC) | 24 DDR5 DIMM slots across 12 channels, up to roughly 6TB; high single-socket bandwidth |
| Storage | Broad NVMe/SAS/SATA options including high-count EDSFF E3.S NVMe configurations | Flexible drive bays including up to 40x EDSFF E3.S Gen5 NVMe and 3.5-inch SAS/SATA options for SDS |
| Expansion & GPU | Up to eight PCIe Gen5 slots; wide GPU support for AI/ML and mixed accelerated workloads | Up to eight PCIe Gen5 x16 slots plus OCP NIC 3.0; supports up to 3 double-width or 6 single-width GPUs |
| Cooling | Air cooling with optional Direct Liquid Cooling (DLC) for high-TDP CPU configurations | Air cooling tuned for single-socket thermals; EPYC cTDP options from roughly 125W to 400W |
| Best-fit workloads | Virtualization, scale-out databases, HPC, real-time analytics, and GPU-accelerated AI/ML | Software-defined storage, mainstream enterprise apps, and core-dense consolidation on one socket |
| Cost & licensing angle | Higher ceiling and flexibility, typically at higher acquisition cost for a fully loaded node | Single socket can reduce per-core/per-socket licensing and total cost for suitable workloads |
Shop these now
Live configurations from our catalog with partner pricing. Add to your cart to request a firm quote, or build a full BOM.
Dell PowerEdge R770 (Intel Xeon 6)
Dell PowerEdge R7715 (AMD EPYC 9005)
Choose the R770 if you need maximum headroom and flexibility
Pick the R770 when your workload benefits from two sockets — higher total core counts, more aggregate memory bandwidth, up to ~8TB of DDR5, and the broadest I/O and GPU options in this class. Intel Xeon 6's choice of Performance-cores and Efficient-cores lets you tune for per-thread speed (HPC, real-time analytics, large in-memory databases) or for density. It's also the stronger pick for GPU-accelerated AI/ML and demanding virtualization where you want room to grow within a single 2U node, including optional liquid cooling for high-TDP CPUs.
Choose the R7715 if single-socket efficiency fits the job
Pick the R7715 when one socket of AMD EPYC 9005 already covers your needs and you want to keep cost and complexity down. A single high-core EPYC with 12 memory channels delivers strong throughput and bandwidth for software-defined storage, mainstream enterprise applications, and core-dense consolidation — often with simpler, cheaper per-socket licensing than a dual-socket box. Its dense NVMe options (up to 40x E3.S) make it especially attractive for storage-heavy and SDS deployments where you want compute and capacity in one efficient node.
Both are excellent 17th-gen Dell 2U servers, and the decision comes down to socket strategy more than vendor preference. The R770's two Intel Xeon 6 sockets give it the higher ceiling — more cores, more memory, and more expansion — making it the safer choice when you expect to scale or run GPU-accelerated and per-thread-sensitive workloads. The R7715's single AMD EPYC 9005 socket trades that ceiling for efficiency: high core density, strong memory bandwidth, dense NVMe storage, and frequently lower licensing and acquisition cost. If you need headroom and flexibility, go R770; if a well-specified single socket meets the workload, the R7715 is the leaner, often more economical fit. As a Dell partner, Uniqcli can size either platform to your actual workload and licensing model.
Talk to a specialistFrequently asked
What is the core difference between the R770 and the R7715?
The R770 is a dual-socket server using Intel Xeon 6 processors, while the R7715 is a single-socket server using AMD EPYC 9005 processors. In short, the R770 offers more total compute and expansion headroom across two sockets, and the R7715 focuses on delivering high core density and memory bandwidth efficiently from a single socket.
Which one is better for software-defined storage?
The R7715 is particularly well-suited to software-defined storage. Its single-socket design, high core counts, 12 memory channels, and dense NVMe options (including up to 40 EDSFF E3.S Gen5 drives) make it a strong, cost-efficient SDS and storage-heavy node. The R770 can also serve storage roles, but its dual-socket design is geared more toward balanced compute, virtualization, and accelerated workloads.
Does choosing a single socket hurt performance?
Not necessarily. For many mainstream and storage workloads, one AMD EPYC 9005 socket with high core counts and 12 memory channels provides ample performance, and a single socket avoids cross-socket (NUMA) overhead while often lowering software licensing costs. You'd lean toward the dual-socket R770 when you genuinely need more total cores, more memory capacity, or more PCIe/GPU expansion than one socket can provide. Uniqcli can help benchmark your workload against both before you commit.
Build your Dell bill of materials.
Send us the requirement, the project, or an existing quote to beat. We come back with a validated, TAA-compliant Dell configuration and a real price, often below list.
[email protected] · Chicago, IL